AWS SPECIFICATIONS FOR ELECTRODES.
A) For Mild
Steel Electrodes.
AWS SPECIFICATION
1) E-6012
2) E-6013
3) E-6013
4) E-6013
5) E-7014
AWS SPECIFICATION
1) E-7018 A1
2) E-8018 B2
3) E-8018 B2L
4) E-9018
B3
5) E-9018 B3L
AWS SPECIFICATION
1) E-7016
2) E-7018
3) E-7018
4) E-7018-1
5) E-7018G
6) E-7018CIL
7) E-8018G
8) E-9018G
9) E-9018M
10) E-10018M
11) E-11018M
D) For Heat
Resistance Steel and Stainless Steel.
AWS SPECIFICATION
1) E-308-16
2) E-308L-16
3) E-308H-16
4) E-347-16
5) E-316-16
6) E-316L-16
7) E-309-16
8) E-309Mo-16
9) E-310-16
10) E-2209-16
E) For Cast
Iron.
AWS SPECIFICATION
1) E-NiCi
2) E-NiCuB
3) E-NiFeCi
CONVERSION
TABLE OF UNITS FOR PROPERTIES USED IN WELDING.
PROPERTY MULTIPLE BY
1) Area
Inch² to mm² 6.451 x 10²
Mm² to Inch² 1.550
033x10-3
2) Current Density
A/Inch² to A/Inch² 003x10-3
A/mm² to A/Inch² 6.451
600x10²
3) Deposition Rate
lb/h to Kg/h Approx. 0.45
Kg/h to lb/h Approx.
2.2
4) Flow Rate
ft3/h to Litre per
Minute 4.719 475x10-1
Gallon per HR to Litre per
Minute 6.309 020x10-2
Gallon per min to Litre
per Minute 3.785 412
cm3/min to
Litre per Minute 1.000 000x10-3
Litre per Minute to ft3/h 2.118 880
cm3/min to ft3/h 2.118 880x10-3
5) Heat Input
J/inch to J/m 3.937 008x10
J/m to J/inch 2.540 000x10-2
Inch to mm 2.540 000x10-2
Ft. to mm 3.048 000x10-2
mm to Inch 3.937 008x10-2
mm to ft. 3.280 840x10-3
6) Tensile Strength
psi to Pa 6.894 757x10-3
lb/ft² to Pa 4.788 026x10
N/mm² to Pa 1.000 000x106
Pa to psi 1.450 377x10-4
Pa to lt/ft² 2.088 543x10-2
Pa to N/mm 1.000 000x10-6
7) Travel speed
of Wire(mm/s)
In./mm to mm/s² 4.233 333x10-1
mm/s to
Inch./min 2.362 205
J to ft.lb.f 0.737
J to Kgfm 0.102
ConversionConversion EmoticonEmoticon